How to Flash S8500 wave 1 from oS 1.0 or 1.2 to 2.0
1.download latest samsung USB drivers:
2.download multiloader V5.65:
3.download Bada 2.0 firmwire for S8500(Wave 1) in INDIA:
4.install the latest USB drivers and multiloader.
Unpack the firmware files to a specified folder.
5.Install samsung kies latest version.
Connect your phone to PC via Samsung KIES mode and make sure that it recognizes the phone.
Now disconnect the phone from PC & close Samsung KIES in computer.
6. Switch off your phone and press Volume down key + Power key + Camera Key.
A download screen will appear on your phone.
7.Run Multiloader 5.65.
8.Follow the steps:
Select LSI
Tick Full Download
Click Boot and select Boot folder of the firmwire.
Click AMSS and select ‘amss.bin’ file which is located in the PC
Click Apps and select ‘apps_compressed.bin’ file which is located in the PC
Click Rsrc1 and select ‘Rsrc_ Open_Europe_Common.rc1
Click Rsrc2 and select ‘Rsrc2_ (Low).rc2’
Click Factory FS and select ‘FactoryFs_ Open_Europe_Slav.ffs
Click CSC and select CSC_S8500_Open_Europe_Common_OXAK7.csc
Click SHP APP and select ‘ShpApp.app’.It should like this
Click FOTA and select bplib_S8500OpEuroCommon.fota
9.Connect your phone to PC via USB cable
10.Click download in multiloader.
[If it cannot find the port then press PORT SEARCH in Multiloader and then press download]
11. It will take 15mins to Flash the new OS.
Do not press any key on phone or PC while its flashing.
12.Adjust the date and time.
[Note:For proper working of firmware keep debugging level to low(*#33284*#) from keypad]
[Note: Use multiloader 5.65 only
Disclaimer: I am not responsible for your phone if any thing happens in case. ]
Enjoy!!
[ur phone should hv the original samsung theme before flashing]
SET YOUR WAVE CPU FREQUENCY TO 1 GHZ.
By default CPU frequency is 800Mhz on Bada 2.0
To set higher frequency, on keyboard make this code: *#197328640#
After select 8 common, 8 DVFS Configuration, 1 static level 0 (800mhz), 1 static level 0 (800mhz) and then # to validate.
If you want to go back to default, same manipulation but select 5 dynamic level.
To see frequency CPU: *#197328640# then 4, then 8, then 1.
Thanks to Badaforums.net
Thank you so much! Really appreciate it !
ReplyDelete